ASSESSMENT 1 BRIEF
Subject Code and Title MIS605 Systems Analysis and Design
Assessment Requirement Analysis
Individual/Group Individual
Length 2000 words +/- 10%
Learning Outcomes The Subject Learning Outcomes demonstrated by successful completion of the task below include:
a) Identify, critically evaluate and recommend information systems solutions for inefficiencies in business processes, procedures and work practices using data and process modelling techniques.
b) Formulate, validate and document business requirements for a medium-scale information system development project and effectively communicate these requirements to the stakeholders.
c) Demonstrate the ability to effectively analyse, design and develop information systems using Unified Modelling Language (UML) models.
Submission For 12-week Duration: Due by 11:55pm AEST Sunday end of Module 3.1 (Week 5)
For 6-week Duration: Due by 11:55pm AEST Sunday end of Module 3.1 (Week 3)
Weighting 30%
Total Marks 100 marks
Task Summary
In response to the case study provided to you by your facilitator, identify the functional and the nonfunctional requirements for the required information system and then decide on the project and the software development life cycle. Also identify actors, build a use case diagram and document set of use cases.
Context
System analysis methods and skills are of fundamental importance for a Business Analyst. This assessment allows you to enhance your system analysis skills by capturing the business and then functional and non-functional requirements of a system. It helps you in identifying “what” the proposed system will do and “how”?
Instructions
1. Please read the case study provided to you by your facilitator. Note that every piece of information provided in the case has a purpose.
2. Once you have completed reading the case study. Please answer the following questions:
Question 1 (10 mark).
For the given case study, propose a suitable software development life cycle and project life cycle. Provide diagrams with justification.
Question 2 (10 mark).
Identify all the human and the non-human actors within the system. Provide brief description against every actor, clearly describing if the actor is primary, secondary or an abstract actor.
Question 3 (30 marks).
Using the information provided in the case study, build and provide a Use Case Diagram (UCD) using any diagramming software.
Question 4 (50 marks).
Document all use cases (use case methods). All use cases identified in the Use Case Diagram in Question 3 must be elaborated in detail. Please document each use case using the following template:
Use Case Number
Use Case Type Base/Abstract (Extends or Includes)
Use Case Name
Actor Involved
Associated Data Sources
Associated User Interfaces
Pre-Condition(s)
Post Condition(s)
Detailed
Description
Normal Course of Events Using a
Flow Chart
Diagram
Alternate
Course(s)
Note: Please make assumptions where needed.
Word Count and Layout
• The total word count for this assessment should be no more than 2200 words.
• Please provide all your answers in a MS word document.
• Please note that you are NOT required to copy the questions over to the MS Word document. Use the question number to indicate which question your answer relates to.
• The recommended font size is 12 with 1.5 line spacing.
Referencing
It is essential that you use appropriate APA style for citing and referencing research. Please see more information on referencing in the Academic Skills webpage.
Submission Instructions
Please submit the written assessment via the Assessment link within Assessment 1. The Learning Facilitator will provide feedback via the Grade Centre in the LMS portal. Feedback can be viewed in My Grades.
Academic Integrity
When submitting their assessment task, students will be asked to declare the academic integrity of their assessment by completing and signing an assignment cover sheet. You can
find the assignment cover sheet here
All students are responsible for ensuring that all work submitted is their own and is appropriately referenced and academically written according to the Academic Writing Guide. Students also need to have read and be aware of Torrens University Australia Academic Integrity Policy and Procedure and subsequent penalties for academic misconduct. These are available at https://www.torrens.edu.au/policies-and-forms.
Students also must keep a copy of all submitted material and any assessment drafts.
Special Consideration
To apply for special consideration for a modification to an assessment or exam due to unexpected or extenuating circumstances, please consult the Assessment Policy for Higher Education Coursework and ELICOS and, if applicable to your circumstance, submit a completed Application for Assessment Special Consideration Form to your Learning Facilitator. These documents are available at https://www.torrens.edu.au/policies-and-forms.
Assessment Rubric
Assessment Attributes Fail
(Yet to achieve minimum standard) 0-49% Pass
(Functional)
50-64% Credit
(Proficient) 65-74% Distinction
(Advanced)
75-84% High Distinction
(Exceptional)
85-100%
Question 1: For the given case study, propose a suitable software development life cycle and project life cycle. Provide diagrams with justification.
10%
The proposed project life cycle and the software development
life cycle is not appropriate for this case study. The proposed project life cycle and the software development
life cycle is appropriate for this case study. The proposed project life cycle and the software development
life cycle is appropriate for this case study.
Solution is provided with strong reasoning but diagrams needs improvements. The proposed project life cycle and the software development
life cycle is appropriate for this case study.
Solution is provided with strong reasoning and the diagrams are clear and reflect the case requirement. The proposed project life cycle and the software development
life cycle is appropriate for this case study.
Solution is provided with strong reasoning and the diagrams are clear and reflect the case requirement.
Student clearly explains the advantages of the proposed solution for the given case.
Question 2: Identify all the human and the non-human actors within the system. Provide brief description against every actor, clearly describing if the actor is primary, secondary or an abstract actor.
10%
Actors identified are largely incorrect. Actors identified are partially incorrect. Actors identified are correct but sufficient detail is not provided. Actors identified are correct and sufficient detail is provided. Actors identified are correct and sufficient detail is provided. The student has clear understanding of human, non-human, primary, secondary and abstract actors.
Assessment 1, MIS 605 Page 5 of 6
Assessment Attributes Fail
(Yet to achieve minimum standard) 0-49% Pass
(Functional)
50-64% Credit
(Proficient) 65-74% Distinction
(Advanced)
75-84% High Distinction
(Exceptional)
85-100%
Question 3: Using the information provided in the case study, build and provide a Use Case Diagram (UCD) using any diagramming software.
30%
UCD does not include major use cases, many actors in the UCD are missing, associations of actors are not given with the use cases, extends and includes are not identified where required and not linked to the base use case. The use case diagram does not sync in well with the requirements laid down in the case study. UCD misses some important use cases, some actors in the UCD are missing, some associations of actors are not given with the use cases, extends and includes are partially identified (where required). Extends and includes are not appropriately linked to the base use cases. The use case diagram does not fully sync with the requirements laid down in the case study.
UCD has all the use cases and actors, some associations of actors are not given with the use cases, extends and includes are partially identified (where required). Extends and includes are not appropriately linked to the base use cases. The use case diagram largely syncs with the requirements laid down in the case study. UCD has all the use cases and actors, associations of actors are given with the use cases, extends and includes are identified (where required). Extends and includes are not appropriately linked to the base use cases. The use case diagram syncs in completely with the requirements laid down in the case study. UCD has all the use cases and actors, associations of actors are given with the use cases, extends and includes are identified (where required). Extends and includes are appropriately linked to the base use cases. The use case diagram syncs in completely with the requirements laid down in the case study.
Question 4: Document all use cases (use case methods). All use cases identified in the Use Case Diagram in Question 3 must be elaborated in detail.
50%
Use case descriptions are incomplete and do not sync in with the given case study. Use case descriptions are partially complete and do not fully sync in with the given case study. Use case descriptions are complete but do not fully sync in with the given case study. Use case descriptions are complete and are in sync in with the given case study. Use case descriptions are complete, detailed and are in sync in with the given case study.
Assessment 1, MIS 605 Page 6 of 6
GET ANSWERS / LIVE CHAT